1. Daily maintenance:
Cleaning equipment: After each production, clean the dust, oil and residual materials on the surface of the equipment.
Check fasteners: Check whether fasteners such as bolts and nuts are loose and ensure that they are in a tight state.
Lubrication and maintenance: Lubricate moving parts (such as gears and bearings) to reduce wear.
2. Regular maintenance:
Check the screw and barrel: Check the wear of the screw and barrel regularly, and repair or replace them if necessary.
Maintain the mold: Clean the mold regularly, check the wear of the mold, and ensure the molding quality.
Check the electrical system: Check whether the connection of wires, cables and electrical components is good and whether the insulation is intact.
3. Preventive maintenance:
Develop a maintenance plan: Develop a detailed preventive maintenance plan based on the frequency of use and running time of the equipment.
Record maintenance content: Record the content, time and results of each maintenance to facilitate the analysis of the equipment operation status.
4. Safe operation:
Operation training: Ensure that the operator is familiar with the operating procedures and maintenance methods of the equipment to avoid misoperation.
Maintenance during shutdown: When shutting down, you need to clean the residual materials in the equipment first to prevent the materials from solidifying in the equipment.
Equipment storage: Equipment that is idle for a long time needs to be unplugged and covered with dust cloth to avoid dust accumulation.
