Knowledge

1. Check the Vacuum Gauge Check the Vacuum Gauge Reading: A vacuum gauge directly displays the vacuum level and is typically installed at a key location in the vacuum system. While

1. Visual Inspection Inspect the oil pipes: Check the oil pipes in the hydraulic system for obvious cracks, wear, or damage, especially at the joints and connections. Inspect the j

1. Daily Maintenance Keep Clean: Regularly clean dust and dirt from the equipment surface, especially key components such as the extruder, mold, and cooling system. Check for Pipe

1. Emergency Stop Button Function: The emergency stop button is used to quickly stop the machine in an emergency, preventing accidents. Location: It should be installed in an easil

1. Daily Maintenance Cleaning the Equipment: Regularly clean the machine, including the screw, barrel, and mold, to prevent residual material from decomposing or aging. Lubricating

1. Optimize the cooling system Control the cooling water temperature: Ensure that the cooling water temperature is appropriate. It is generally recommended that the cooling water t

1. Raw material control Select high-quality raw materials: Select high-quality PVC resins and additives to ensure that the impurities and moisture content in the raw materials are

1. Low energy consumption in the production process High-efficiency extruder: The PE pipe production line adopts a high-efficiency single-screw extruder with the characteristics of

Daily maintenance 1. Cleaning equipment: After the daily production, clean the hopper, barrel, screw and other parts of the extruder to prevent residual materials from agglomeratin

Factors affecting the difficulty of operation 1. Equipment complexity: Modern WPC Panel Extruders are usually highly automated and complex in function, requiring operators to be fa

1. Cleaning work Equipment surface cleaning: Regularly remove dust and dirt from the surface of the equipment to maintain the heat dissipation effect and operation stability of the

1. Cooling water recycling system System design: A cooling water recycling system is used to form a water cycle through a circulating water tank, cooling equipment and a circulatin