What are the key points of maintenance of Plastic Pipe Belling Machine?

1. Daily cleaning
Body cleaning: After each use, dust, plastic debris and other debris on the surface of the equipment should be cleaned. If these debris enter the inside of the equipment, they may affect the operation of mechanical parts and even damage electrical components. You can use a clean soft cloth to wipe the body. For stains that are difficult to remove, you can use a mild detergent.
Mold cleaning: The expansion mold is a part that directly contacts the pipe and should be cleaned with emphasis. During the production process, plastic residues are easy to adhere to the surface of the mold. The mold should be cleaned regularly with a special mold cleaner and a soft brush to ensure the finish of the mold cavity, so as to ensure the quality of the pipe expansion.
2. Maintenance of mechanical parts
Lubrication work: The transmission parts of the equipment, such as chains, gears and screws, need to be lubricated regularly. Generally speaking, lubrication should be performed once every certain period of work. Choosing a suitable lubricant, such as grease or lubricating oil, can reduce friction between parts, reduce the degree of wear, and also reduce the noise generated when the equipment is running.
Component tightening: Regularly check whether the screws, nuts and other fasteners of the equipment are loose. Since the equipment will vibrate during operation, these fasteners may gradually loosen. Especially in the key parts of the flaring machine, such as the mold mounting seat, motor mounting seat, etc., loose fasteners may cause the equipment accuracy to decrease and affect the dimensional accuracy of the pipe flaring.
3. Electrical system maintenance
Check the circuit: Regularly check the electrical components such as the wires, plugs and sockets of the equipment. Check whether the wires are damaged or aged, and whether the plugs and sockets are in good contact. If the wires are found to be damaged, they should be replaced in time to prevent electrical faults such as short circuits, which endanger the safety of the equipment and the safety of the operator.
Cleaning of electrical components: Excessive dust accumulation on electrical components may affect their heat dissipation performance and normal operation. You can use a compressed air tank to clean the components in the electrical control cabinet and blow away the dust. But be careful to turn off the power during operation, and avoid blowing directly on sensitive components to avoid damage.
5. Regular calibration and inspection
Accuracy calibration: Regularly calibrate the flaring dimensional accuracy of the equipment. You can use standard pipe samples or measuring tools to check whether the size after flaring meets the requirements. If accuracy deviation is found, it is necessary to adjust the relevant parameters of the equipment, such as the position of the mold, heating temperature, etc. It is generally recommended to conduct an accuracy check once a month or quarter. The specific frequency can be determined according to production requirements and equipment usage.
If you want to know more about Plastic Pipe Belling Machine, we sincerely invite you to visit our website www.wxuniversalcasting.com!